SK-2060WS,heavy in construction utilizing M1.5 rack&pinion and planetary gearbox on the gantry ,dual planetary gearbox system for the length of the table, italian panel saw and spindle for various material including aluminium,wood,acrylic and so on . Special purpose NC Studio CNC available with ISO G-code for control functions that allows easy interfacing with all major CAD/CAM software and industry standard solid modeling software packages.
The combination of a highly rigid base, steel weldments and castings,high accuracy ball screw and linear guideways make it an ideal choice for machining wood, MDF, plywood, plastic, honeycomb ,aluminium and other non-ferrous metal materials.
|Panel Saw||Made in Italy|
|Drive System||PMI Linear Guideways;TBI Ball Screw on Z;Rack&Pinion on X, Y|
|Air Requirement||Dry air only|
|Power||220V 3Phase or 380V, 50-60Hz ,90Amp|
|File Format||G Code or HPGL|
Panel Saw and Spindle:Panel Saw is made in italy and available with both metal and non-metal material Spindle is air-cooling 4.5kw 220v single phase or 380v phase.
Aluminium Table Top:It will never get deformated in long working life,ideal for high accuracy machining.
Servo Motor and Gearbox:Panasonic 1kw AC Panasonic Servo motor & direct drive SHIMPO planetary Gearbox,the structure maximizes the torsional moment when motor power is rated,it is for high load and more smooth machining, it offers long-term maintenance-free solution.
CNC:PC based NC Studio Controller with more friendly human&machine interface/HMI,fully executed with computer. It well realizes high-speed and high-precision motion control.Better anti-interference performance due to control signal adopting differential signal input&output,featured as power failure protection function,linear interpolation, circular interpolation, intelligent look-ahead, reverse cutting, backlash compensation, breakpoint memory and block skip, etc.
.Better anti-jamming and allowing long distance transmission of signal, with a 3m handwheel cable;
.Accurate pulse output;
.Magnetic function available
Rack&Pinion:Quality M1.5 Rack&pinion Germany is featured as much lower noise and more steady meshing.
TBI Ball Screws:
.End cap circulate design, high speed, high Dm-N rating with low noise design,
.Unique circulate high lead design to ensure smoothness running performance.
.Patent seal system, excellent dust proof ability
.Variety of selection in diameter and leads
.Zero backlash, high stiffness.
PMI Linear Guideways:The trains of balls are designed to a contact angle of 45° which enables it to bear an equal load in radial, reversed radial and lateral directions. Therefore, it can be applied in any installation direction. Furthermore, MSA series can achieve a well balanced preload for increasing rigidity in four directions while keeping a low frictional resistance. This is especially suit to high precision and high rigidity required motion.
The patent design of lubrication route makes the lubricant evenly distribute in each circulation loop. Therefore, the optimum lubrication can be achieved in any installation direction, and this promotes the performance in running accuracy, service life, and reliability.
Auto Tool Sensor:Automatic tool length calibration and registration, it allows for easy and accurate “Z” zero position for single and multiple tool changes through the program,saves time & error-free.
Central Lubricator:The compact pump unit for centralized lubrication system is designed specially to supply lubricant from a central source to the points on a machine at which friction occurs. It delivers a controlled amount of either grease or oil to multiple/specific locations on a machine while the machine is operating. This automated unit essentially comprises of a drive motor, a pump & lubricant reservoir, electronic controller, supply fittings, level switch, pressure gauge and numerous feed lines. Bearing wear and tear is reduced with minimal maintenance, and often, some of the friction-generated heat is dissipated with the help of the lubricant.
Nebulizer:it sends oil mist to tool and working piece for tool cooling,lubricating and it helps to make finished cutting.
Frame:The base frame is made of heavy-duty tubular steel that is welded, precisely machined by gantry milling machine ,relieved by vibration device and heat treated so that the foundation remains true and steady over the operational life of the machine.